Products
Home
Products
Accessories
AKY-LED3525-P
AKY-LED3525-P
Category:
Accessories
Manuf:
• Outputs max.8MP (3840×2160) @25/30fps
• Integrated functions: The illuminator integrates high performance LED strobe and flashlight together.
• O&M: Supports displaying equipment online status, fault status, working status, equipment power, equipment temperature, equipment photosensitive value and other operation and maintenance status information of the illuminator in real time through RS485 on cameras or intelligent cabinets.
• Adjustable brightness: Supports adjusting the LED strobe brightness from 1 to 20.
• Adjustable pulse width: Supports configuring the pulse width of the flashlight as 0 ms to 3 ms and the strobe as 0 ms to 5 ms on the camera web interface or client.
• Recycle time: Less than 50 ms.
• Trigger mode: Digital triggering
• Strobe duration: Supports calculating the device service life through the duration of the strobe shines.
• Flash counting: Supports quick locating of the signal interference on site through counting the times of the illuminator flashing and being triggered.
• Anti-interference: The illuminator filters the detected pulse width (below the configured threshold) to ensure the device works properly and improve reliability.
• False triggering shield: Supports shielding false triggering interference.
• Strobe cascading: Supports controling multiple illuminators with one camera, through the connection between the Strobe synchronization output line and the strobe trigger line of the next illuminator, to achieve the effect of multi-lane synchronization illumination.
• Creative structure: Streamline design, simple appearance and high saturation greatly improve the protection level (waterproof and dust-free). The inside heat dissipation design prevents the illuminator from overheating damage effectively.
• Wide voltage power supply: Supports 100–240 VAC power supply.
**Basic**
Light Type LED light
Light Source Visible light (wavelength: 350 nm–780 nm)
Color Temperature 3500 K
Center Illuminance <40 lx (20 m illumination)
Trigger Mode Pulse width trigger/edge trigger
Light Spot Coverage 3 lanes (installation height 6 meters, capturing distance 26 meters)
Illumination Distance 16 m–26 m (52.49 ft–85.30 ft)
Recycle Time ≤10ms, meet the requirements of the camera three consecutive shots
**LED**
Frequency 50Hz/100Hz
LED Quantity forty-two
Luminous Flux 1,800 lm
Color Rendering Index (CRI) 79.0
Strobe Pulse Width 0~3ms
Strobe Delay 0~4ms
Flash Pulse Width 0~5ms
Flash Delay 0~6ms
Strobe Time Record the total stroboscopic time
Lens Illuminating Angle 10° × 30°
**Function**
Day/Night Sensitivity adjustable (1–6)
Operating Mode Supports steady on and flash
Status Indication Support remote display of fill light fault and normal state on camera WEB
Power Detection Displays the power of the device in real time
Temperature Detection Displays the temperature of the device in real time
Photosensitivity Value Detection Displays the photosensitivity value of the device in real time
Remote Failure Display Supports abnormal/normal detection of network, current, and voltage
Brightness 1 ~ 20 brightness is adjustable
Snapshotand Illumination Synchronizes with the camera to provide light when the camera takes snapshots.
Synchronization Synchronizes with the camera to provide light when the camera is making a video.
Recording and Illumination Yes
Synchronization Yes
**Port**
I/O 1
Flash Light 1
Strobe Input 1
RS-485 1
**General**
Power Supply 220 VAC ± 10％
Power Consumption ≤60W
Operating Temperature –40 °C to +70 °C (–40 °F to +158 °F)
Operating Humidity 10%–90% (RH), non-condensing
Protection IP66
Product Dimensions 258.0 mm × 250.9 mm × 127.0 mm (10.16" × 9.88" × 5") (L × W × H)
Net Weight 4.5 kg (9.92 lb)
Gross Weight 5 kg (11.02 lb)
Installation Universal joint installation
Connect
Sign up for the latest news through Email
© 2021 Kangyin Inc. All rights reserved